| Part | Color | 6 in. | 8 ft. | 12 ft. | 16 ft. | 24 ft. | 18 ft. |
|---|---|---|---|---|---|---|---|
| 1000 - Sill | white | 38.48 | 56.04 | 73.59 | 105.69 | ||
| 1001 - Mullion | white | 34.89 | 50.63 | 66.39 | 94.85 | ||
| 1002 - Jamb | white | 31.74 | 45.91 | 60.09 | 85.35 | ||
| 1003 - Head | white | 32.78 | 47.48 | 62.19 | 88.54 | ||
| 1005 - Sp. Angle | white | 2.56 | |||||
| 4008 - Snap Cap | bronze | 44.33 | 64.81 | 85.28 | 122.85 | ||
| 4008 - Snap Cap | clear ano. | 44.33 | 64.81 | 85.28 | 122.85 | ||
| 4008 - Snap Cap | white | 44.33 | 64.81 | 85.28 | 122.85 | ||
| 4009 - Press. Bar | mill | 46.59 | 68.19 | 89.78 | 129.61 | ||
| 3919 - Perimeter Cap | white | 86.24 | |||||
| 3919 - Perimeter Cap | bronze | 109.50 | |||||
| 3919 - Perimeter Cap | clear ano. | 109.50 | |||||
| 4581 - Perimeter Cap | white | ||||||
| 4581 - Perimeter Cap | bronze | 134.83 | |||||
| 4581 - Perimeter Cap | clear ano. | 119.44 |
| Thickness | Color | 4x8 | 4x12 | 4x16 | 4x24 |
|---|---|---|---|---|---|
| 6mm | clear | 237.67 | 353.17 | 468.67 | 693.00 |
| 6mm | bronze | 245.46 | 364.87 | 484.26 | 716.41 |
| 6mm | opal | 245.46 | 364.87 | 484.26 | 716.41 |
| 10mm | clear | 285.67 | 425.17 | 564.67 | 837.00 |
| 10mm | bronze | 298.87 | 444.96 | 591.07 | 876.61 |
| 10mm | opal | 298.87 | 444.96 | 591.07 | 876.61 |
| 16mm | clear | 373.26 | 556.57 | 739.87 | 1,099.81 |
| 16mm | bronze | 384.67 | 573.67 | 762.67 | 1,134.00 |
| 16mm | opal | 384.67 | 573.67 | 762.67 | 1,134.00 |
| 25mm | clear | 534.67 | 798.67 | 1,062.67 | 1,584.00 |
| 25mm | bronze | 569.46 | 850.87 | 1,132.26 | 1,688.41 |
| 25mm | opal | 569.46 | 850.87 | 1,132.26 | 1,688.41 |
| Item | Retail Price |
|---|---|
| Cut, Blown & Taped (shop applied) | 4.80 / LF of edge cut |
| Breathable End Tape (gray) | 1.07 / LF |
| 1/16" x 3/4" Glazing Tape (black) | 36.98 / 150' roll |
| 1/8" x 1/2" Glazing Tape (black) | 19.63 / 75' roll |
| #8 x 1/2" Sq.Dr. PHS (plain, bronze, white) | 7.41 / 25 |
| #8 x 1/2" Sq.Dr. PHS (plain, bronze, white) | 25.93 / 100 |
| #9 x 1 1/2" w/ seal washer (plain, bronze) | 25.93 / 100 |
| #9 x 2" w/ seal washer (plain, bronze) | 29.63 / 100 |
| #10 x 1 3/4" SS SMS FH PHIL (plain) | 25.93 / 100 |
| #10 x 3" SS SMS FH PHIL (plain) | 36.48 / 100 |
| Special Cut Charges | 6.58 / cut |
Note: 4008 & 4009 extrusions not used for cross perlin supports
Note: An oversized hole (~1/2") can be drilled through the structured sheet to allow for proper fastening where the sheet spans over a rafter.
Pricing now available on Fasterbids with your free membership!